I/O Module Installation and Wiring - I/O Terminal Block Wiring Diagrams
Step
Install I/O module, install a
11
Filler Block cover, Part
number 900TNF-0001.
In each slot location not
12
occupied by an I/O
module, install a Filler
Block cover, Part number
900TNF-0001.
Revision 19
06/14
Procedure
Note: The Filler Block Cover looks much like an I/O Terminal
Block assembly, except that it does not include the wire
terminating block (screw terminals). The Filler Block mounts in
the same manner as a Terminal Block (with captured screws at
top and bottom). Blank labels are provided for mounting in the
hinged door.
HC900 Process Controller Installation and User Guide
Comments
Reference
81