Honeywell HC900 Installation And User Manual page 131

Communications Installation - Wiring and cabling
Controller Link Type:
Port Controller to
/Connector
Type
RS-485 Modbus slave
3-Plug network
connector
(controller is
master)
E1 Host, Peer, and
10/100 Base-T Internet Devices
RJ45
E2 Host, Peer, and
10/100 Base-T Internet Devices
RJ45
E1 Lead CPU
10/100Base-T supports
RJ45
redundant
Modbus/TCP
Protocol to OPC
server, PC
supervisory and
data acquisition
software
packages and
Designer
Software
configuration
software.
E2 Lead CPU
10/100Base-T supports
RJ-45
redundant
Modbus/TCP
Protocol to OPC
server, PC
supervisory and
data acquisition
software
packages and
Designer
Software
configuration
software.
I/O Single I/O rack
100Base-T
I/O Single I/O rack
100Base-T
Revision 19
06/14
Cable Type
Belden #9271 (or
equivalent)
CAT5 cable IO, up to
100 meters.
CAT5 cable IO, up to
100 meters.
Shielded Ethernet
CAT5 cable IO with RJ-
45 connectors
Shielded Ethernet
CAT5 cable IO with RJ-
45 connectors
HC900 Process Controller Installation and User Guide
To Device/Port
Refer to device's port
instructions
RJ45 connector on Host,
Peer, or Internet Device
RJ45 connector on Host,
Peer, or Internet Device
C50/C70 Controller's I/O
port to Scanner 1's I/O port.
C75 CPU A's I/O port to
Scanner 2's I/O A port.
C75 CPU B's I/O port to
Scanner 2's I/O B port.
Details
Default IP address is
192.168.1.254
Default IP address is
192.168.2.254
Default IP address is
192.168.1.254
Default IP address is
192.168.2.254
119