Honeywell HC900 Installation And User Manual page 228

Appendix - Installation of Remote Termination Panels (RTPs) - Relay Output
Relay Output
Step
4
Connect field wiring.
1 2 3
ATTENTION
•
Cable power is limited to 24 Amps per module at 60C (140 degrees F) and 32 Amps at 54C
(129 degrees F).
•
As shown in the schematic, each switch is SPST and opens and closes one lead of the relay
wiring. If your application requires opening and closing both sides of the load wiring, then an
external DPST switch is required.
216
4 5 6 7 8 9
HC900 Process Controller Installation and User Guide
Action
10 11 12 13 14 15 16 17 18 19 20
Revision 19
06/14