Honeywell HC900 Installation And User Manual page 58

Pre-Installation Planning - Cable/Wiring Distance Planning
How to make Ethernet cables
Ethernet cable (shielded cable IO Cat 5) contains 4 twisted pairs of wires and a drain wire. Each pair
consists of a solid color wire and a color wire with a white stripe.
1. Hold the cable ends and RJ45 connectors side by side as shown:
2. For straight through cable, arrange wires as shown in the following table. Wires go "straight through",
no crossovers.
Cable left end
Left to right
Wire color/pin number
white/orange/1
Orange/2
white/green/3
Blue/4
white/blue/5
Green/6
white/brown/7
Brown/8
46
Straight-through cable assembly
10Base-T / 100Base-T
Signal Description
Tx +
Tx -
Rx +
Unused
Unused
Rx -
Unused
Unused
HC900 Process Controller Installation and User Guide
Cable right end
Left to right
Wire color/pin number
white/orange/1
Orange/2
white/green/3
Blue/4
white/blue/5
Green/6
white/brown/7
Brown/8
Revision 19
06/14