Avidyne IFD540 Installation Manual page 97

SPR Flag (LAT/VRT Super Flag)
Selection
Hidden
In view
TO-FROM
Selection
From
Hidden
TO
Selected Course
This section will calibrate the external CDI/HSI to the IFD5XX.
1. Select 150° on the CDI/HSI;
2. Verify the Selected Course is displayed on the IFD5XX and press the ENTR button on
the IFD5XX;
3. After calibrating, verify 30° increments on the CDI/HSI are properly displayed on
the IFD5XX ±2 .
DME Channel Mode
This configuration allows you to set the format for the DME tuning data output.
Selection
UNINSTALLED
King Serial
Parallel 2x5
Parallel BCD
Parallel Slip
Narco 890/891
600-00299-000
The lateral and vertical flag on the external indicator is hidden
The lateral and vertical flag on the external indicator is in view
Table 82: NAV Superflag Test Page
The From flag on the external indicator is in view
The TO/FROM flag on the external indicator is hidden
The TO flag on the external indicator is in view
Table 83: Navigation TO/FROM Page
No DME installed/configured
King Serial DME tuning
2 of 5 parallel DME tuning
Shifted BCD (Binary Coded Decimal) parallel DME tuning
Slip-code parallel DME tuning
2 of 5 parallel DME tuning, compatible with the following DME
units:
Narco DME 890
Narco DME 891
ARC (Cessna) RTA-476A
Table 84: DME Channel Mode
Page 97 of 198
IFD5XX Installation Manual
Description
Description
Description
Revision: 02