Gad 42 Configuration; Other System Diagnostics - Avidyne IFD540 Installation Manual

7.5.12 GAD 42 Configuration

The IFD5XX can be connected to the Garmin GAD42 Interface Adapter but there is no
dedicated GAD42 configuration page in the IFD5XX.
If the IFD5XX is replacing a GNS530/W that had previously been connected to a GAD42,
then no action is required since the configuration is already saved in the GAD42.
If this is a new installation of an IFD5XX (i.e. not replacing an existing GNS530/W) or if the
GAD42 had to be replaced for service, then the GAD42 must be configured via a manual
strapping method as described in Garmin P/N 190-00159-00 GAD42 Installation Manual,
Section 5.1.
If the IFD5XX displays a "GAD 42 Needs Service" message, return the GAD 42 unit to the
manufacturer.
7.5.13 Other System Diagnostics Pages
The IFD provides other miscellaneous diagnostics pages that are shown here for reference.
Each page variant is accessed by pressing the L4 LSK labeled "Info".
600-00299-000
Figure 23: Hardware Version Page
Page 102 of 198
IFD5XX Installation Manual
Revision: 02