Avidyne IFD540 Installation Manual page 86

Channel Outputs
Selection
Off
ADS-B (Avi)
Aviation
Aviation no Alt
CrossSync
GDL 69
HW EGPWS
Ryan TCAD
MapMX
600-00299-000
No device(s) connected to output of this channel
Serial position data to the following units:
Trig TT31 (V 3.1 or later)
Avidyne AXP340
Serial position, altitude, velocity, and navigation data to the
following units:
Argus 3000, 5000, or 7000 Moving Map
Avidyne FSD Series
Garmin MX20 (V5.6 or later), GMX200
Garmin GPSMAP 195, GPSMAP 295 or GPS III Pilot
Garmin GPSMAP 196, GPSMAP 296, and GPSMAP 396
Garmin GPSMAP 496, and GPSMAP 696
Garmin Aera 796/795
Garmin GTX 327 Transponder
JP Instruments EDM-700 or EDM-760 Engine Monitor
Shadin 91204XM Digital Fuel Management System
Shadin 91053XP Digital Fuel Management System
Shadin 9628XX-X Fuel/Air Data Computer
Stormscope Series II (with NAVAID) Moving Map
Serial position, velocity, and navigation data to the following units:
Garmin MX20 (V5.5 or earlier)
Horizon DDMP
Insight TAS 1000 Air Data Computer
Serial transfer of flights plans and user waypoints and cross-side
data (e.g. Datalink, traffic, lightning, etc) between IFD5XX units
Note: This is only an option for CHNL 3.
Serial data output to a Garmin GDL69/69A (Version 4.01 or later)
Serial communication to a Bendix/King (Honeywell) KGP 560
EGPWS
Traffic information to a Ryan 9900B, 9900BX, or TAS6XX Series
System.
Serial position, altitude, velocity, and navigation data to the
following units:
Page 86 of 198
IFD5XX Installation Manual
Description
Revision: 02