The pages on the "Diag" tab are for Avidyne Service Center diagnostics purposes and are not
described in this manual.
7.6 Checkout
After configuring the IFD5XX, the following post-installation tasks should be performed.
7.6.1 Database Check
Verify the Navigation, Chart, and Obstacle databases are up-to-date. If the databases need to
be updated, reference the IFD5XX Pilot's Guide or Section 10.1 for update procedures.
7.6.2 Airplane Flight Supplement Check
Complete and install the IFD5XX Airplane Flight Manual Supplement in the aircraft's Flight
Manual or Pilot's Operating Manual.
7.6.3 Instructions for Continued Airworthiness
Complete and install the IFD5XX Instruction for Continued Airworthiness in the aircraft
maintenance records.
7.6.4 Aircraft Weight and Balance
Update the Aircraft's Weight and Balance in the aircraft records.
For those installations where an IFD5XX is replacing a GNS530 (any variant), since the
IFD5XX is within 5% of the weight of the removed GNS530 (less than 1 pound difference), no
new weight and balance must actually be performed according to AC 43.13-1B Change 1
600-00299-000
Figure 26: IFD Temperature Status Page
Page 104 of 198
IFD5XX Installation Manual
Revision: 02