Avidyne IFD540 Installation Manual page 166

IFD540
P1001
GPS ANNUNCIATE
IFD540
VLOC ANNUNICATE
NOTES:
1. ALL WIRES TO BE 24 AWG OR GREATER UNLESS OTHERWISE NOTED.
2. RESERVED
FOR CONVERTERS 01278-( ) S/N 600A AND ABOVE.
3
INSTALL JUMPER AS REQUIRED TO SET AK 1081 ARINC 429 INPUT SPEED TO
4
MATCH IFD540 OUTPUT SETTING. REFER TO MANUFACTURER'S
DOCUMENTATION FOR ADDITIONAL DETAILS.
5
IF THE GPS ANNUNCIATE SIGNAL IS ONLY USED BY THE AUTOPILOT, THIS MAY
BE CONNECTED DIRECTLY.
6 IF THE VLOC ANNUNCIATE SIGNAL IS ONLY USED BY THE AUTOPILOT, THIS MAY
BE CONNECTED DIRECTLY.
7 FOR CONVERTERS 01278-( ) 599 AND BELOW.
600-00299-000
GPS ANNUNCIATE
(TO OTHER SYSTEM)
2 (AIRCRAFT POWER)
VLOC ANNUNCIATE
P1001
(TO OTHER SYSTEM)
1
Sheet 2 of 2
Page 166 of 198
IFD5XX Installation Manual
J3
22
(AIRCRAFT POWER)
S-TEC
AUTOPILOT
GPSS STEERING
GPS TRACK GAIN
S-TEC AUTOPILOT ST-901
GPSS CONVERTER
GPS OVERRRIDE
Revision: 02