Avidyne IFD540 Installation Manual page 177

IFD540
WEIGHT ON WHEELS
NOTES:
1. ALL WIRES TO BE 24 AWG OR GREATER UNLESS OTHERWISE NOTED.
2. WIRE HARNESS OVERBRAID IS NOT SHOWN BUT MAY BE REQUIRED.
REFER TO MANUFACTURER'S DOCUMENTATION FOR COMPLETE PINOUT AND INTERCONNECT INFORMATION.
3.
4 IF THE AIRCRAFT HAS AN EXISTING WEIGHT ON WHEELS OUTPUT, DO NOT CONNECT.
IFD540
4
RS232 OUTPUT 2
NOTES:
1. ALL WIRES TO BE 24 AWG OR GREATER UNLESS OTHERWISE NOTED.
2. WIRE HARNESS OVERBRAID IS NOT SHOWN BUT MAY BE REQUIRED.
REFER TO MANUFACTURER'S DOCUMENTATION FOR COMPLETE PINOUT AND INTERCONNECT INFORMATION.
3.
IF RS-232 PORT 1 IS NOT AVAILABLE, USE ANY OTHER AVAILABLE PORT.
4
5
ADS-B OUTPUT REQUIRES A SEPARATE INSTALLATION APPROVAL.
600-00299-000
AVIDYNE Trigg Avionics
AXP340 TT31
P1001
Primary Primary
5
5
8
TRANSPONDER
AVIDYNE
5
AXP340
P1001
Secondary
3
GPS RS232 INPUT
58
Figure D - 38: Transponder Interconnect
Page 177 of 198
IFD5XX Installation Manual
TRANSPONDER
SQUAT SWITCH IN 4
Revision: 02