Avidyne IFD540 Installation Manual page 172

IFD540
GPS ARINC 429 OUT A
GPS ARINC 429 OUT B
GPS ARINC 429 IN 1A
GPS ARINC 429 IN 1B
VOR/ILS 429 OUT A
VOR/ILS 429 OUT B
NOTES:
1. ALL WIRES TO BE 24 AWG OR GREATER UNLESS OTHERWISE NOTED.
2. AT IFD540 UNIT, TERMINATE SHIELD GROUNDS TO THE CONNECTOR BACKSHELL OR
USE CARD-EDGE CONNECTOR TO TERMINATE SHIELD GROUNDS TO BACK PLATE –
THE SHIELD LEADS MUST BE LESS THAN 3.0 INCHES. CONNECT OTHER SHIELD
GROUNDS TO AIRCRAFT CHASSIS WITH AS SHORT A CONDUCTOR AS PRACTICAL.
3
3. SEE GARMIN GAD 42 INSTALLATION MANUAL FOR COMPLETE PIN-OUT AND
INTERCONNECTION INFORMATION. GAD42 MUST BE CONFIGURED USING STRAPS
ON THE UNIT.
600-00299-000
P1001
46
47
48
49
P1006
24
23
Figure D - 33: Garmin GAD 42 Interconnect
Page 172 of 198
IFD5XX Installation Manual
GARMIN GAD 42
P421
1 GPS ARINC 429 IN A
2 GPS ARINC 429 IN B
13 GPS ARINC 429 OUT A
14 GPS ARINC 429 OUT B
3 NAV ARINC 429 IN A
4 NAV ARINC 429 IN B
3
Revision: 02