Setting Pre-Sets And Tour - Digimerge DH230 Series Instruction Manual

Appendix F: Connecting PTZ Cameras

Setting Pre-Sets and Tour

To set a Pre-Set:
1. Move the PTZ camera to the desired position.
2. Press the Preset button (
• Custom 1 will illuminate.
3. Set the number for the Preset location.
4. Click ENTER to save and exit.
To go to a Pre-set:
1. Click the GoTo button (
2. Enter the desired preset number and click ENTER.
158
• Start AUTO TOUR
• Press the Auto Tour button
• Press + and enter the range of preset and Click ENTER
• For example, Auto Tour button, +5 will start the tour of 1~5
presets of the PTZ camera
• PTZ custom function 1; Display on the remote control
• PTZ custom function 2; Zoom on the remote control
• PTZ custom function 3; PTZ on the remote control
• Speed has 8 increments—keep pressing the buttons to
increase/decrease speed
.)
).