Triggering Cameras To Record During Video Loss - Digimerge DH230 Series Instruction Manual

Triggering cameras to record during Video Loss

If video loss occurs, the system can trigger secondary cameras to begin recording as an event.
For example, if a vandal attempts to cut the camera wiring, as soon as the cable wire is cut, the
system triggers other cameras to detect as a motion event.
1. Under the DAY EVENT or NIGHT EVENT tab, click (
configure.
2. Under VLOSS, ensure that whatever channel you are configuring is selected. In this example,
Camera 1 is selected. Select cameras 2 and 3.
Example
Select camera 1 and 2
3. Click ENTER to save your settings.
Final Result
When video loss occurs on cameras 2 or 3, camera 1 begins recording as an event.
Setting up Motion Recording
) beside the channel that you wish to
Event Edit icon
37