Mouse Control; Mouse Tips; Touch Screen Control; Touch Screen Tips - Digimerge DH230 Series Instruction Manual

Mouse Control

The mouse is the primary control device for the system. To
connect a USB mouse:
• Connect a USB mouse to the USB port on the front or rear panel.
1. Left-Button: While in a split-screen display mode,
double-click an individual channel to view it in full-screen;
double-click again to return to the split-screen display mode.
While navigating menus, click to select a menu option;
double-click to open the next menu.
2. Right-Button: Right-click anywhere on the screen to open the
Virtual Remote; double-click anywhere on the screen to
return to the previous menu.
3. Scroll-Wheel: Move the scroll wheel up or down to increase/decrease the value of a selected menu
option.

Mouse Tips

When using the mouse, the
top-right corner of every menu window. When you change system
settings and configurations, click
changes.

Touch Screen Control

A touch screen monitor (not included) can be used as a substitute for mouse control. Touch
screen monitors must be Windows 7® Touch compatible to work with the system.
To connect a touch screen monitor:
1. Connect a USB cable (not included) from a USB port on the front or rear panel of the system
to the monitor.
2. Connect a VGA cable (not included) from the
• Connect an HDMI cable (not included) from the
3. Power on the monitor, and then power on the system.
To control the system using a touch screen:
• While in viewing or playback mode, press and hold anywhere on the screen to access the
Virtual Remote. For details, see "Using the Virtual Remote" on page 16. Tap outside the Virtual
Remote to exit.
• While in a split-screen display mode, double-tap an individual channel to view it in full-screen.
Double-tap again to return to split-screen display mode.
• While navigating menus, tap to select a menu option.

Touch Screen Tips

When using a touch screen, the
the top-right corner of every menu window. When you change
system settings and configurations, tap
changes.
You can reposition camera channels using a touchscreen. For
details, see "Repositioning Channels" on page 19.
and buttons appear in the
ENTER EXIT
(ENTER) to save your
VGA OUT
and buttons appear in
ENTER EXIT
(ENTER) to save your
1
3
port on the rear panel to the monitor,
port on the rear panel to the monitor.
HDMI
Remote Control
2
Exit
Enter
OR
Exit
Enter
11