Digimerge DH230 Series Instruction Manual page 183

DH230: Installing 3 hard drives (8 & 16 channel only)
On the 8 & 16 channel models, you can install a maximum of three hard drives in the system if you
remove the DVD/CD-RW drive. This is optional. Note that if you remove the optical drive, you will
need to back up externally onto a USB device.
To remove the internal DVD/CD-RW drive:
1. Remove the SATA power and data cable from the CD/DVDRW drive.
2. Turn the unit over, and remove the three (3) screws that secure the CD/DVDRW drive. Place
your hand underneath the DVD/CD-RWdrive as you loosen the last screw to prevent the DVD/
CD-RW drive from falling.
3. With your hand over the DVD/CD-RW drive, turn the system over.
Appendix J: Replacing the Hard Drive
169