Remote Control - Digimerge DH230 Series Instruction Manual

REMOTE CONTROL

1. DVR ID: Pairs the DVR with the remote (optional).
For details, see "GENERAL" on page 56.
2. POWER: Press to power the system ON/OFF
(password required).
3. System configuration buttons:
• TIME SEARCH: Press to open the Time Search
menu.
EXTERNAL-SEARCH
•
Search menu. The External Search menu allows you
to browse for content on an external hard drive
connected to the DVR.
LOG
• : Press to open the system log.
SPOT OUT
• : Press to select SPOT OUT output.
INFO
• : Press to view vital system information.
BACKUP
• : Press to open the Backup Menu.
DISPLAY ) P
• ( : ress to switch between single
channel full-screen, quad, and split-screen
displays.
ZOOM
• : Press to open the zoom field (live view,
single channel only). Press ENTER to zoom in.
P/T/Z
• : Press to open the PTZ menu.
4. Navigation/Menu:

• : Press to move cursor up
• : Press to move cursor down
• : Press to move cursor left
• : Press to move cursor right
• MENU: Press to open the Main Menu, and to confirm
menu selections.
) P
• ENTER ( : ress to confirm menu options/
selections/ enter sub-menu options.
• CANCEL/OSD: Press to close menu windows; press
to show/hide the on-screen display (OSD); press to
clear channel indicators (loss, alarm, etc.).
• + / - : Press to increase/decrease menu options.
: Press to open the External
1
3
4
5
6
You can use the channel buttons on the remote
control to enter numbers, letters, and other
characters.
Remote Control
2
9