Update; Info - Digimerge DH230 Series Instruction Manual

UPDATE

Use the Update menu to upgrade system
firmware.
The system supports most major
NOTE:
brands of USB flash drives with a capacity
of 10 MB ~ 16 GB.
To upgrade firmware:
1. Download the latest firmware update from
the Digimerge website.
2. Copy the firmware to a blank USB flash
drive.
Do not have any folders on the USB
NOTE:
flash drive—just the firmware file.
3. Connect the USB flash drive to the USB
port on the front or back panel.
4. Stop all recording on the system.
You must stop all recording in order
NOTE:
to perform the upgrade.
5. Open the Main Menu and select
6. Under the UPDATE tab, select
7. Select and press the
START
Firmware upgrade begins.
the USB flash drive until the upgrade
process is complete.
buttons or power off the system during the
upgrade process.
When upgrade is finished, click the REBOOT button
in the prompt window to restart the system.
.
SYSTEM
.
UPDATE
button.
ENTER
Do not
remove
Do not
press any

INFO

View important system information:
• S/W VERSION: The current system
firmware version.
• DOMAIN NAME: Your Digimerge DDNS
domain name.
• MAC: The physical address of the DVR on
your network.
• LANGUAGE: The current system language.
• NETWORK: The IP address of the system
• RECORD DISK: HDD, size and space
remaining.
• DISK SUMMARY: The status of the HDDs,
and what state they are in.
• STREAM: the hard drive is in recording
mode
• 0 MIRROR: the hard drive is in RAID
mode
• SYSTEM HEALTH: Indicates system
temperature and voltage.
• DISK ORDER: Displays the internal system
disk order.
• EXTERNAL 1 & EXTERNAL 2: Displays
devices connected to the USB port.
• USB (FRONT): The status of the USB port
on the front panel.
• USB (REAR): The status of the USB port on
the rear panel.
Using the Main Menu
57