Setting Up Motion Recording - Digimerge DH230 Series Instruction Manual

SETTING UP MOTION RECORDING

Motion recording allows the system to mark events as motion recording. This allows you to search
for footage that only has movement.
Step 1: Configure Camera motion sensitivity & Configure Event frame rates
1. Press the MENU button on the remote or front panel to open the main menu.
• If using a mouse, right-click to open the virtual remote, then click MENU.
2. Click CAMERA.
3. Click the camera number button to select the camera you wish to configure.
4. Click the ( ) button to select the entire screen (selected by default) or click (
select certain portions of the screen by double-clicking the portions of the screen you wish to
enable motion.
5. Beside MOTION LEVEL, press -/+ to adjust the motion sensitivity.
6. Click ENTER to save your settings.
7. Click RECORD>DAY.
Record
NOTE: You can also click on RECORD> under SCHEDULED USE, select ON. Click the NIGHT tab
and follow the same instructions below.
Setting up Motion Recording
Click camera button
Motion detection area. Blue areas
indicate that the screen is enabled
for motion recording.
) to
DAY
33