Setting Ptz Pre-Sets - Digimerge DH200+ Series Instruction Manual

CMS-DH Central Management Software
PTZ
To activate the PTZ control, click the PTZ button (
NOTE: You must select the channel that has a PTZ camera before using PTZ controls.
Zoom Out
Focus Out
Open Iris
Close Iris
Save Preset
Custom 1
Auto Tilt
Menu Call
Escape

Setting PTZ Pre-Sets

1. Click the Pan & Tilt buttons to move the camera to the desired position.
2. Click the Save Preset button (
and then click Ok.
To access a pre-set
• Click the Go to Preset button (
72
).
). Enter the desired pre-set number (between 0 - 9999)
). Enter the pre-set number, and then click Ok.
Pan & Tilt
Zoom In
Focus In
Auto Focus
Auto Iris
Go to Preset
Auto Tour
Custom 2
Custom 3
Auto Pan
Auto Pan
Speed Down
Speed Up
PTZ Power