Setting Date And Time; Network Setup - Digimerge VCE400 Series Quick Reference Manual

STEP 2
SETTING UP YOUR DIGTIAL VIDEO RECORDER (DVR)
1
Setting Date & Time
Press the "Menu" Button

Use the Left or Right Arrows to Navigate to the

"System" Menu
Move down to "Clock" and press

Select "Date&Time" and press "status/home/enter"

Use the arrow keys to highlight which entry to modify

(year/month/day hour:minute:second)
Use the "F-" (auto) or "F+" (freeze)

or increment the highlighted values
Press "status/home/enter" to set the time

Press the "Spot/ESC" button 3 times

Move to "Save and Exit" and press

MENU
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technologies Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2007 Digimerge. All rights reserved.
VCE400 Series QSG_EN_R1 Page 3
2
Setting Camera Names


"status/home/enter"



keys to decrement

"status/home/enter"





- BASIC - NETWORK SETUP
Press the "Menu" Button
Use the Left or Right Arrows to Navigate to the
"Screen" Menu
Move down to "Title" and press "status/home/enter"
Select desired channel number (i.e. CH 1:) and press
"status/home/enter
Use the directional arrows to Highlight the desired
letters or numbers, Press the "status/home/enter"
select the letter
Repeat this process until the camera name is displayed
in the "CH x: " section
To make corrections to the data entered, you can
use the "F-" (auto) or "F+" (freeze) keys to highlight
the letter in the "CH x:" section you want to change/
modify, then use the directional arrows to highlight the
letter you want to change it to, press the "status/home/
enter" to change the selected character
Press "Spot/ESC" to set the Camera Name
Repeat this process for each Channel
Press the "Spot/ESC" button 2 times
Move to "Save and Exit" and press "status/home/enter"
3

Network Setup

Press the "Menu"

Use the Left or Right Arrows to Navigate to the

Menu
Select "Network"

For more information on these features, refer to the

VCE400 Series Manual, under the "6.6.1 Network"
section
to Press the "Spot/ESC"

Move to "Save and Exit"

Button
"Link"
and press "status/home/enter"
button 2 times
and press "status/home/enter"
www.digimerge.com