Appendix G: Connecting Additional External Monitors - Digimerge DH230 Series Instruction Manual

Appendix G: Connecting Additional External Monitors

APPENDIX G: CONNECTING ADDITIONAL
Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor
Out displays the exact on-screen display of the system.
Use the Spot port (BNC) to use the Spot Out function. Spot Out displays connected cameras on the
system.
NOTE: A BNC-to-RCA adapter (not included) is required to connect a monitor with RCA inputs.
DH230
Spot Monitor
(not included)
To use spot out functions:
1. With a spot monitor connected, press the
Remote followed by the numeric button for the channel you wish to view (full-screen).
2. Press the
SPOT OUT
is set to Auto Sequence).
When an alarm is triggered, Spot Out will display the triggered channel in full-screen.
160
EXTERNAL MONITORS
Monitor
(not included)
DH250
VIDEO OUT
Connect up to 3 SPOT
OUT monitors
button twice to begin Auto Sequence (by default, Spot Out on the system
Monitor
(not included)
button on the remote control or Virtual
SPOT OUT
Spot Monitor
(not included)