Erasing Specified Areas Of Copies ("Erase" Function); To Copy Using The "Erase" Function - Konica Minolta bizhub C352 User Manual

Application functions
8.17

Erasing specified areas of copies ("Erase" function)

Copies can be produced by erasing unwanted areas around the original,
such as the transmission information on received faxes and the shadows of
punched holes.
With frame erasing, the same width can be erased along all four sides of the
original or a different width can be erased along each side of the original.

To copy using the "Erase" function

1
Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original"
on page 3-7.
2
Touch [Application], and then touch [Erase].
– To cancel all settings for the Application functions, touch [Reset].
The Erase screen appears.
C352
A
A: 0.0 mm to 50.0 mm
8
8-61