Engine
Freewheel removal
•
Heat the magneto flywheel with the
specific heater.
•
Undo and remove the six screws.
•
Remove the freewheel from the mag-
neto flywheel.
Installing the flywheel
•
Insert the woodruff key on the crank-
shaft.
•
Insert the start-up transmission gear
after applying a layer of grease.
•
Insert the flywheel on the crankshaft.
•
Screw the screw together with the
washer but without tightening.
ENG - 12
SL 750 SHIVER