SL 750 SHIVER
•
Fit the lathed driven disc (3).
•
Fit the nitrided steel disc (4).
•
Fit the clutch discs. Start with the fric-
tion material discs and alternate with
steel discs.
•
Position all friction material discs with
their teeth aligned in one of the long
slots of the clutch bell.
•
Place the control rod.
•
Place the pressure plate.
•
Fit the clutch springs.
•
Fit the screw washers.
•
Tighten the six screws operating in
stages and diagonally.
•
Replace the gasket upon refitting.
Head and timing
Engine
ENG - 23