APRILIA SL 750 SHIVER Service Station Manual page 125

SL 750 SHIVER
Error DSB 08
Error cause
•
An oil sensor failure is signalled when,
with engine running, it is detected that
the sensor circuit is closed. This error
is signalled by the bulb icon and the
general warning light turns on as well.
Troubleshooting
•
Check if oil pressure is low with the
specific gauge.
Neutral sensor
GEAR IN NEUTRAL SENSOR
Function
it tells the gear position to the control unit: in neu-
tral or in gear.
Operation / Operating principle
for gear in neutral, the circuit is closed to ground
connection: then, via CAN, the control unit sends
the signal to the instrument panel which turns on
the neutral speed warning light.
Level in wiring diagram:start-up enabling
switches
Location:
•
on the vehicle: left side of the vehicle,
near flywheel cover
•
connector: upper part of the flywheel
cover
Electrical characteristics:
•
gear in neutral: closed circuit (continu-
ity)
•
gear engaged: open circuit (infinite re-
sistance)
Pin-out:
1. Voltage 12V
CAUTION
Electrical system
ELE SYS - 67