APRILIA SL 750 SHIVER Service Station Manual page 264

Chassis
Removing the tail pipe
•
Loosen the clamp between the ex-
haust end and the manifold.
•
Undo and remove the upper screw.
•
Protect the swingarm so as not to spoil
it while removing the exhaust end.
•
Keeping the plastic cover up, undo and
remove the two central screws and col-
lect the washers.
•
Then remove the exhaust end.
Removing the manifold - tail pipe
•
Remove the front exhaust manifold.
•
Remove the lambda probe.
•
Loosen the clamp of the rear exhaust
manifold.
CHAS - 8
SL 750 SHIVER