APRILIA SL 750 SHIVER Service Station Manual page 26

Characteristics
Specification
Type A crankcase
Type B crankcase
Primary category
Pinion can be selected from two types (A or B) ac-
cording to the centre to centre distance between
the primary reduction gears.
The category can be checked out on the pinion it-
self.
Crankshaft category
Shaft can be selected from two types (1 or 2) ac-
cording to the crank pin diameter.
Shaft can be selected from seven types (E1,
E2, ...) according to connecting rod weight.
Specification
Crankshaft type 1
Crankshaft type 2
Bushing selection
The connecting rod has only one size category. Therefore, bushings are chosen only based on crank-
shaft type.
Specification
Crankshaft type 1
Crankshaft type 2
Connecting rod selection
Not all weight types are available as spare parts; only the main two. Refer to the following table for your
choice:
CHAR - 20
C
RANKCASE SELECTION TYPE
Centre to centre distance: 110.50 - 110.54 mm
Centre to centre distance: 110.46 - 110.50 mm
C
RANKSHAFT SELECTION TYPE
Crank pin diameter: 41.994 - 42.000 mm (1.65330
Crank pin diameter: 41.988 - 41.994 mm (1.65307
BUSHINGS
Connecting rod type 1: half-bushings A (red)
Connecting rod type 1: half-bushings B (blue)
SL 750 SHIVER
Desc./Quantity
(4.3504 - 4.3519 in)
(4.3488 - 4.3504 in)
Desc./Quantity
- 1.65354 in)
- 1.65330 in)
Desc./Quantity