SL 750 SHIVER
Oil level (from sleeve rim, without the spring
and with pumping member fully down)
122 mm (4.80 in).
•
Fit the spring.
•
Fit the preloading pipe together with
the spring centring.
•
Fit the special tool.
Specific tooling
AP8140147 Spacer tool
•
With the aid of a second operator, hold
the pumping member rod firmly, lower
the spacer retention tool, insert the
stop ring and the plate separating the
spacer-pumping member between the
ring and the nut.
Specific tooling
AP8140148 Spacer-pumping element separat-
ing plate
Suspensions
SUSP - 17