Ricoh G165 Service Manual page 181

Item
Horizontal (-15 to +15)
step
Tray2
Vertical (-15 to +15) step
Horizontal
Bypass Tray
Vertical
SM
Smart Organizing Monitor (Printer Model)
Selections
1.32mm per step. Range is -5mm to
+5mm.
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
0.24mm per step. Range is -3.6mm
to +3.6mm
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
1.32mm per step. Range is -5mm to
+5mm.
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
0.24mm per step. Range is -3.6mm
to +3.6mm
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
5-33
Remarks
G165/G166/G167/G181/G183/G184