Ricoh G165 Service Manual page 195

Rev. 07/05/2009
V34 Settings
Equalizer
Redialing
First TX Speed
Symbol Rate
Reseller Default
Not Execute Does not reset anything. Returns to the upper level.
Resets all the settings to the factory defaults except the following.
Execute
After executing, the initial setup menu starts after the next power-on.
IMPORTANT: See NOTE on the next page.
SM
These selectors set the equalizer's training level to
be applied if training fails due to poor line
connection.
[Automatic (Default)/ 4 Points/ 16 Points]
Resend when a communication error occurs.
[Disabled (Default)/ Not Disabled]
Sets the first transmission speed choice, before
fallback.
[2400 Bps/ 4800 Bps/ 7200 Bps/ 9600 Bps
/ 12000 Bps/ 14400 Bps/ 16800 Bps/ 19200 Bps/
21600 Bps/ 24000 Bps/ 26400 Bps/ 28800 Bps/
31200 Bps/ 33600 Bps (Default)]
This setting limits the transmission speed range in
V.34 mode by masking the desired symbol rate(s).
[Not Used (Default)/ 3429 Sym/Sec
/ 3200 Sym/Sec/ 3000 Sym/Sec
/ 2800 Sym/Sec/ 2400 Sym/Sec]
Counter for Machine Life
5-47
Service Menu (MF Model)
G165/G166/G167/G181/G183/G184