Group
Item
(Tab)
IP address
Subnet
mask
TCP/IP
Gateway
address
SM
Smart Organizing Monitor (Printer Model)
Selections
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer
xxx.xxx.xxx.xxx
power must be turned off/on for the new
setting to take effect.
The default setting is "192.0.0.192"
when DHCP is off.
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer
power must be turned off/on for the new
setting to take effect.
xxx.xxx.xxx.xxx
Will show all zero if network initialization
is not finished. Any change will be
ignored before the end of network
initialization.
The default setting is "255.255.255.0"
when DHCP is off.
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer
power must be turned off/on for the new
setting to take effect.
xxx.xxx.xxx.xxx
Will show all zero if network initialization
is not finished. Any change will be
ignored before the end of network
initialization.
The default setting is "192.0.0.192"
when DHCP is off.
5-15
Remarks
G165/G166/G167/G181/G183/G184