Service Menu (MF Model)
Brand ID
Maintenance ID
LSU Adjustment
Trans. Belt Adjust
Fuser SC Detect
Color
Registration
Reset Transfer
Unit Life Counter
Fuser SC Reset
G165/G166/G167/G181/G183/G184
00* – 7F
Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
00* – 7F
Displays the current maintenance ID number.
Do not change this setting (Designed for Factory Use).
Character: alphanumeric "0-9", "a-f", "A-F", only
Input 160 bytes
valid data can be input.
setting.
Input length: 160 bytes
When you execute "Trans. Belt Adjust", the transfer belt adjustment is
done. This calibrates the motor speed to match the length of the new
transfer belt.
If On, the engine detects SC559. If Off, the engine
On/Off*
does not detect "Fusing SC Reset."
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.
Resets the transfer unit life counter.
This button is for resetting an SC related with the fusing errors.
5-38
SM