Ricoh G165 Service Manual page 179

Item
Display string only
0: Plain paper 1 mode
1: Plain paper 2 mode
2: Plain paper 3 mode
3: Reserved (not display)
Media type 4: Thick stock 1 mode
5: Thick stock 2 mode
6: Thick stock 3 mode (Not
used)
7: Thick stock 4 mode
8: Envelope 1 mode
Front (-15 to +15)
Back (-15 to +15)
Fuser Temperature (-30 to 0)
SM
Smart Organizing Monitor (Printer Model)
Selections
Please select the media type.
This adjusts the transfer roller
current, based on the default value.
The range of adjustment is from -15
[μA] to +15 [μA], in units of 1.
The printer will warm up
automatically after this setting is
changed.
This adjusts the transfer roller
current, based on the default value.
The range of adjustment is from -15
[μA] to +15 [μA], in units of 1.
Printer will warm up automatically
after this setting is changed.
This adjusts the temperature of the
fusing unit, based on the default
value. The range of adjustment is
from -30 [°C] to 0[°C], the unit is 2.
The printer will warm up
automatically after this setting is
changed. *2
5-31
Remarks
G165/G166/G167/G181/G183/G184