Ricoh G165 Service Manual page 126

Error Codes
Waste Toner Bottle Set Error
Waste toner bottle not set
Disconnected or defective harness of the waste toner bottle set sensor
014
Defective waste toner bottle set sensor
1. Install the waste toner bottle.
2. Check or replace the harness of the waste toner bottle set sensor.
3. Replace the waste toner bottle set sensor.
Tray/Paper Selection Error
No paper in the tray or tray not set in the machine
Paper size requested by the job does not match the paper in the tray
030
1. Install the tray or put the correct size paper in the tray.
2. Check the paper setting in the SOM (Smart Organizing Monitor) for printer
models or user menu mode for MF models.
Paper Selection Error: Feed and Exit
Paper size requested by the job does not match the paper in the tray
031
Selection error for the paper feed and paper exit location in duplex mode
Check the paper feed and exit location in the SOM (Smart Organizing Monitor) for
printer models or user menu mode for MF models.
Jam Error: No Feed from Tray 1
050
Paper slipped
Remove the paper jam at tray 1.
G165/G166/G167/G181/G183/G184 4-2 SM