Setting The Limited Functions Mode From The Service Call Message Screen - Canon imageRUNNER 6570 Reference Manual

3
If the machine still does not operate normally, press
[Shutdown] ➞ contact your local authorized Canon dealer.
NOTE
When you contact your local authorized Canon dealer, have the following
information available:
- Product name
- Details of the malfunction
- The error code displayed on the touch panel display
Setting the Limited Functions Mode from the Service Call
Message Screen
If the Service Call Message screen appears indicating a malfunction of a Finisher
mode, you can clear it by turning Limited Functions Mode 'On' to temporarily limit
the use of the finishing modes. However, after the Limited Functions Mode is
deactivated, the Service Call Message screen may appear again, unless the cause
of the malfunction is removed.
IMPORTANT
If you turn OFF the main power switch when there is a job waiting to print, that job is
erased.
NOTE
If you set Limited Functions Mode to 'On' from the Service Call Message screen, Limited
Functions Mode in Common Settings (from the Additional Functions screen) is also set to
'On'. (See "Limiting Functions," on p. 4-93.)
1
Press [Limited Fnctns Mode].
Service Call Message
9
9-85