2
4
3
4-28
Specifying Common Settings
Select [Initial Function] or [Selected Function] ➞ press [OK].
Details of each item are shown below.
[Initial Function]:
The screen specified as the initial function is displayed
after the Auto Clear mode initiates. For example, if you set
the System Monitor screen as the initial screen, and Auto
Clear initiates while a settings screen for the Mail Box
function is shown, the display returns to the System
Monitor screen.
[Selected Function]: The display returns to the main screen of the function that
was displayed before the Auto Clear mode activated. For
example, if you set the System Monitor screen as the initial
screen, and Auto Clear initiates while a settings screen for
the Mail Box function is shown, the display returns to the
Inbox Selection screen of the Mail Box Function.
The selected mode is set.
Press [Done] repeatedly until the Basic Features screen
appears.