Setting Automatic Delivery - Canon imageRUNNER 6570 Reference Manual

Setting Automatic Delivery

You can set to automatically deliver device information at a specified time. You can
also select which information to deliver.
IMPORTANT
•
When delivering device information, the following machines will not update their
information:
- Machines which are processing a send job
- Machines importing or exporting data via the Remote UI
- Machines which are executing functions from the Additional Functions screen
- Machines which are having their address books accessed
•
Machines which could not receive device information because of a power failure or
network trouble, will not receive updated information until the first automatic update after
the machine recovers.
NOTE
Device information is not delivered if the machine goes into the Shutdown mode, even if
an automatic delivery time is set.
1
Press
If necessary, see the screen shot in step 1 of "Specifying the System Manager
Settings," on p. 7-3.
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
2
Press [▼] or [▲] until [Device Information Delivery Settings]
appears ➞ press [Device Information Delivery Settings].
If necessary, see the screen shot in step 2 of "Registering Delivery Destinations,"
on p. 7-74.
(Additional Functions) ➞ [System Settings].
Specifying Device Information Delivery Settings
(numeric keys) ➞ press
-
7
(ID).
7-85