3
2
4
2-30
Entering Characters from the Touch Panel Display
Press [é].
To enter a space, press [Space].
To move the cursor, press [ ] or [ ].
To enter alphanumeric characters, press the entry mode drop-down list ➞ select
[Alphanum.] ➞ enter the desired characters.
The characters you entered are displayed, as shown below.
NOTE
•
If you make a mistake when entering characters, press [ ] or [ ] to position the
cursor ➞ press [Backspace] to delete the characters ➞ enter the correct
characters.
•
To delete all of the characters you have entered, press
•
The available entry modes, and the maximum number of characters that you can
enter vary, depending on the type of entries you are making.
When you have entered all characters, press [OK].
(Clear).