Changing The Language Shown On The Touch Panel Display - Canon imageRUNNER 6570 Reference Manual

4
4

Changing the Language Shown on the Touch Panel Display

You can select the language displayed on the touch panel display.
NOTE
•
If Language Switch is set to 'On', some characters are restricted and cannot be entered.
To be able to enter all characters, set Language Switch to 'Off'.
•
Even if Language Switch is set to 'On', there are some languages that cannot be
displayed.
•
The default setting is 'Off'.
1
4-74
Specifying Common Settings
Details of each item are shown below.
[Paper Select]:
[Copies]:
[Finisher]:
[Two-sided Print]:
[Erase Document After Printing]: Set whether to erase a document from
[Merge Documents]:
The selected mode is set.
Press [Done] repeatedly until the Basic Features screen
appears.
(Additional Functions) ➞ [Common Settings].
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-24.
Select the paper source.
Set the number of copies from 1 to 9,999 sets.
Set the type of collating.
Set whether to perform two-sided printing.
memory after it prints.
Set whether to merge documents, if you select
multiple documents that are stored in an inbox
for printing.