Setting The Limited Functions Mode From The Service Call Message Screen - Canon imageRUNNER Advance C5255 Basic Operation Manual

Setting the Limited Functions Mode from the Service Call
Message Screen
When [Limited Functions Mode] is displayed, follow the procedures below.
If you turn OFF the main power switch when there is a job waiting to print, that job is erased.
If you set Limited Functions Mode to 'On' from the Service Call Message screen, [Limited Functions Mode] in [Management
Settings] (Settings/Registration) is also set to 'On' . (See e-Manual > Security.)
Press [Limited Functions Mode]  [Yes].
1
A message prompting you to turn the main power switch back ON appears.
Turn OFF the main power of the main unit.
2
170
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
3
1
2
1. Open the main power switch
cover.
2. Press the main power switch
to the " " side.
3. Close the main power switch
cover.