Standard Local Print Settings - Canon imageRUNNER 6570 Reference Manual

Standard Local Print Settings

You can set the standard print settings for the machine. The Standard Local Print
Settings are used in the following cases:
• If you print documents stored in inboxes without changing the print settings
• If you merge and print multiple documents stored in an inbox
• If you reset the settings before printing a document that has been sent from a
computer and stored in an inbox
The Standard Local Print Settings are:
• Paper Select (Paper source): Auto
4
• Copies: 1
• Finisher:
- The optional Copy Tray-L1 is attached:
Do Not Collate, Collate
- The optional Finisher-T1 or Saddle Finisher-T2 is attached:
Do Not Collate, Collate, Offset Collate
Top Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right)
- The optional Finisher-T1 or Saddle Finisher-T2, and Puncher Unit-M1 are
attached:
Do Not Collate, Collate, Offset Collate
Top Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right), Hole Punch
- Face Up/Face Down (for all finishers):
Auto
Face Down (Normal):Printed sheets are always output face down.
Face Up (Reverse): Printed sheets are always output face up.
• Two-sided Print: On, Off
• Erase Document After Printing: On, Off
• Merge Documents: On, Off
*1 Indicates the default setting.
4-72
Specifying Common Settings
*1
*1
, Rotate Collate, Group, Rotate Group
*1 If you scan and print a single page original, or print on
:
nonstandard sized paper, or other available paper that is
loaded in the stack bypass, the printed sheets are output
face up. Otherwise, the printed sheets are output face down.
*1
*1
*1
*1 , Group, Offset Group, Staple (Corner:
*1
, Group, Offset Group, Staple (Corner:
*1