Canon imageRUNNER 6570 Reference Manual page 385

The message <Retrieving information... Wait...> appears on the touch panel
display.
The destination is registered.
NOTE
•
For instructions on entering characters, see "Entering Characters from the Touch
Panel Display," on p. 2-27.
•
If any of the following is true for the destination machine, the message <Could not
retrieve information for the device to register. Register as a destination?> is
displayed. If you press [Yes], <Deliverable Settings> on the Details screen will be
blank.
- The main power is turned OFF.
- The destination machine is not connected to the network.
- Every function in Receive Limit for Each Function under <Receiving Settings> in
Device Information Delivery Settings is set to 'On'.
● To automatically search for destinations:
❑
Press [Auto Search/Register].
Specifying Device Information Delivery Settings
7
7-77