Canon imageRUNNER 6570 Reference Manual page 119

•
If the following screen is displayed, adjust the width of the slide guides to match the
paper size stored in Stack Bypass Standard Settings, or set Stack Bypass
Standard Settings to 'Off' in Common Settings (from the Additional Functions
screen). (See "Standard Paper for the Stack Bypass," on p. 4-68.)
5
Select the desired paper type ➞ press [OK].
If you are printing on the back side of a previously printed sheet, press [2nd Side
of 2-Sided Page].
IMPORTANT
When printing on special types of paper, such as heavy paper or transparencies,
be sure to correctly set the paper type, especially if you are using heavy paper. If
the type of paper is not set correctly, it could adversely affect the quality of the
image. Moreover, the fixing unit may become dirty and require a service repair, or
the paper could jam.
NOTE
•
[Transparency] can be selected only if [LTR] or [LTRR] is selected as the paper
size.
•
For more information on paper types, see "Available Paper Stock," on p. 2-52.
Making Prints Using the Stack Bypass
2
2-47