Setting an Output Tray to Hold Different Paper Sizes
This mode enables you to output different paper sizes to the same output tray.
IMPORTANT
This mode is available only if an optional finisher is attached.
NOTE
The default setting is 'On'.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-24.
2
Press [▼] or [▲] until [Different Paper Sizes for the Output
Tray] appears ➞ press [Different Paper Sizes for the Output
Tray].
(Additional Functions) ➞ [Common Settings].
Specifying Common Settings
4
4-89