3
Place 10 sheets of blank paper into the feeder ➞ press [Start].
Make sure that you fan the sheets of paper well.
Use LTR paper (16 to 20 lb bond (60 to 80 g/m
To cancel feeder cleaning, press [Cancel].
While the feeder is being cleaned, the screen below appears.
When cleaning is complete, the message <Finished cleaning the feeder.>
appears for approximately two seconds on the touch panel display.
The display returns to the Adjustment/Cleaning screen.
NOTE
To cancel feeder cleaning while it is in progress, press [Cancel].
4
Press [Done] repeatedly until the Basic Features screen
appears.
The feeder is clean. Try scanning again.
2
)).
Routine Cleaning
8
8-45