Connecting The Fm/Am Antennas; Plugging In The Power Cable - Yamaha RX-V385 Owner's Manual

4

Connecting the FM/AM antennas

Connecting the FM/AM antennas
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
FM antenna
AM antenna
(TV)
The unit (rear)
Assembling and connecting the AM antenna
Hold down
Note
▪ Unwind only the length of cable needed from the AM antenna unit.
▪ The wires of the AM antenna have no polarity.
(TV)
(TV)
Insert Release
5

Plugging in the power cable

Plugging in the power cable
Warning
(Taiwan, Brazil and Central and South America models only)
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall
outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential
fire hazard.
Before plugging in the power cable
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–
120/220–240 V, 50/60 Hz.
The unit (rear)
After all the connections are complete, plug in the power cable.
The unit (rear)
24
En
VOLTAGE SELECTOR
To an AC wall outlet