Extended Functionality That Can Be Configured As Needed (Advanced Setup Menu); Displaying/Setting The Advanced Setup Menu; Avoiding Crossing Remote Control Signals When Using Multiple Yamaha Receivers - Yamaha HTR-2064 Owner's Manual

Extended functionality that can be configured as needed (Advanced Setup menu)

TRANSMIT
RECEIVER
SLEEP
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
1 2 3
HDMI
1 2 3
Displaying/Setting the Advanced
AUDIO
4 5 6
Setup menu
TUNER
TUNER
MEMORY
Set this unit to the standby mode.
1
PRESET TUNING
INFO
ENHANCER
MOVIE MUSIC STEREO
SOUND
Press A while pressing and holding
STRAIGHT SUR. DECODE
2
g
STRAIGHT on the front panel.
SCENE
BD
TV CD RADIO
DVD
Release the keys when "ADVANCED SETUP" is
SETUP
OPTION
displayed on the front panel display.
After approximately 2 seconds, the top menu items are
i
ENTER VOLUME
displayed.
RETURN
MUTE
A
PHONES
SILENT CINEMA
g
SCENE
REMOTE ID -ID1
i
Cursor D
3 Use PROGRAM to select the item to be set
from the following items.
In the Advanced Setup menu, you can set the following
settings.
REMOTE ID
TUNER (Asia and
General models
only)
INIT
Press STRAIGHT a few times to select the
4
STRAIGHT
value you wish to change.
5 Switch this unit to the standby mode, and
INFO MEMORY PRESET TUNING FM
then switch it on again.
SCENE The settings become effective and the unit is powered
BD
TV CD RADIO
DVD
on. If initialization is selected, it will be performed
INPUT TONE CONTROL STRAIGHT
PROGRAM
when the unit is powered on again.
PROGRAM l / h
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
Changes the remote control ID of a
receiver.
Selects one of the following FM
frequency steps. The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
Initializes various settings for this unit.
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
ID1 (Default)
ID2
■ To change the remote control ID
To set the remote control ID to this unit ID, change ID
number as follows.
• To set to ID1
• To set to ID2
SETUP
REMOTE ID -ID1
Receives the remote control signals set in
ID1.
Receives the remote control signals set in
ID2.
i g
Press Cursor D and "BD/DVD" under SCENE
for 3 seconds or longer.
i g
Press Cursor and "TV" under SCENE
D
seconds or longer.
En
for 3
44