Registering Remote Control Codes For External Component Operations - Yamaha HTR-5063 Owner's Manual

TRANSMIT CODE SET
n
Registering remote control codes
SOURCE RECEIVER
SLEEP
for external component operations
MI
d
1 2 3 4
AV
1 2 3 4
AUDIO
The following section describes how to register remote
5 6 1 2
control code using an example of the registration of the
V-AUX [ A ] [ B ] DOCK
remote control codes of a Yamaha BD player connected
TUNER
to HDMI2 jack.
FM AM
PRESET TUNING
• Perform each of the following steps within 1 minute.
INFO MEMORY
Settings will be automatically stopped if more than 1
ENHANCER SUR. DECODE
MOVIE MUSIC STEREO
minute passes since the last operation. To reset, repeat
STRAIGHT DIRECT
from step 2.
SCENE
h
BD
• Remote control code of an external component cannot
TV CD RADIO
DVD
SETUP OPTION
be set from the name or model number of a unit. Use
"Remote Control Code
ENTER VOLUME
search the available remote control codes from the
RETURN
DISPLAY
category or manufacturer of external components.
• If multiple remote control codes exist, first set the first
TOP POP-UP
MUTE
MENU MENU
code in the list, if it does not work then try the other
REC
codes.
1 2 3 4
l
5 6 7 8
1 Use "Remote Control Code
9 0 10 ENT
ROM to search the available remote control
TV
INPUT
m
codes from the category or manufacturer of
TV VOL TV CH
MUTE
external components.
"2064" can be used for a Yamaha BD player.
d
HDMI2
h
SCENE
l
Numeric keys
m
TV control keys
m
A
n
CODE SET
J
1 : When you want to register a remote control code to the
control keys, press
J
2 : When you want to register a remote control code to the
control keys, enter the TV remote control code in step 4.
2
3
Search" in the CD-ROM to
Search" in the CD-
m
TV
m m
A
( TV control keys) in step 3.
m
TV
nCODE SET
Press on the remote control
using a pointed object such as the tip of a
ballpoint pen.
blinks twice
TRANSMIT CODE SET
SOURCE RECEIVER
SLEEP
HDMI
Press dHDMI2 on the remote control to
J1
switch the input source to HDMI2.
Perform the following steps to register the selected
input source here to the remote control code.
SETUP
Controlling other components with the remote control
4 Enter a remote control code "2064" using
J2
lNumeric keys.
2 0 6
Once the remote control code is registered successfully
the remote control will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
TRANSMIT
SOURCE
SLEEP
HDMI
• If the registration fails, repeat the step 2.
• In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat from step 2 with the other remote
control codes.
5 To switch between BD player linked to
hSCENE
scene selections, press
same time press dHDMI2
approximately 3 seconds.
Then you can operate the external components by
switching the input source to HDMI2, or selecting
HDMI2 in the registered scene.
Same steps for operating other external components,
h
press SCENE and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
4
CODE SET
RECEIVER
and at the
and hold it for
64
En