Connecting Optional Devices - VeriFone VX 520 Installation Manual

T S
ERMINAL ETUP
VX 520 Sprocket Setup
Installing Paper in
the Tray
To install a paper
stack
Installing/Replacing
MSAM Cards
CAUTION
To install or replace
MSAMs
40
VX 520 I
NSTALLATION
Before you can process transactions that require a receipt or record, you must
install paper in the printer tray.
The VX 520 Sprocket uses a stack of double-ply carbonized paper.
1
Remove any partial stack of paper in the printer tray.
2
Place the new stack of paper into the tray
3
Feed the first sheet of paper into the sprocket printer and then turn the
sprocket to feed the paper to the printer.
Figure 25 Loading Paper Stack
When you first receive your VX 520 Sprocket terminal, you may need to install one
or more MSAM cards or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Remove the power cord from the power outlet.
2
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
4
Unscrew the MSAM cardholder cover and pull the cover away to expose the
MSAM slots.
Figure 26 Installing or Replacing MSAMs
G
UIDE