To install or replace
MSAMs
1
Remove the power cord from the power outlet.
2
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
3
Press the unlocking button and then lift the rear cover to access the MSAM
cardholder panel.
Figure 11
Opening VX 520 Rear Cover
4
Hold the MSAM cardholder panel, grasp firmly and pull upward to expose the
MSAM slots.
Figure 12
Removing MSAM Cover
4
Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
T
ERMINAL
VX 520 Setup
VX 520 I
G
NSTALLATION
UIDE
S
ETUP
25